Control your
NATIV
Thermostat
programmable
radio
Installation
Place the thermostat:
- In the main room (e.g. living/dining room) or in the centre of your home,
- on a wall, shelf or accessible piece of furniture at a height of 1.50 m,
- away from heat sources (fireplace, sunlight) and draughts (window, door).
IMPORTANT: Do not install the thermostat on a wall in contact with the outside or with an unheated room (e.g. garage).
Description

❶ Auto mode
❷ Comfort mode
❸ Economy mode
❹ frost protection mode
❺ date and time setting / programming

❶ Time
❷ Day
❸ Measured or setpoint temperature
❹ Current setpoint
❺ Radio transmission
❻ Party mode
❼ Absence mode
❽ Information
❾ Stop mode
radio association
❶ Put the receiver(s) in association mode (see receiver manual).
❷ The thermostat must be in stop mode. Press the 2nd button from the left for 5 seconds. The screen displays the version of the thermostat.
❸ Press the 2nd key from the left again for 5 seconds. The display shows the menu rF01.
❹ Press OK. The thermostat searches for the receivers to associate. The number of receivers found and associated is displayed in the centre of the screen.
